catspeed-cc/openwrt
2
1
Fork 0
Code Issues Wiki Activity
bdd216a4ec
openwrt/target/linux/realtek/dts
History
Carlo Szelinsky 8275b62ecd realtek: rtl930x: add Hasivo S600WP-5GT-2SX-SE 
This commit adds support for Hasivo S600WP-5GT-2SX-SE switch.

Device specification
--------------------
SoC Type:               Realtek RTL9303
RAM:                    128MB DDR3 SDRAM
Flash:                  Fudan FM25Q128A (16 MB)
Ethernet:               5x RTL8221B 10/100/1000/2500Mbps PHY (RJ45)
                        2x SFP+ 10G (I2C/DOM via bit-banged GPIO)
LEDs:                   1x power green (no control)
                        1x system green (via RTL9303 GPIO)
                        3x RJ45 LEDs/port (HC595 shift regs on LED SPI)
                                1x Green (1G link)
                                1x Green (10M/100M link)
                                1x Orange (2.5G link)
                        2x SFP+ LEDs/port (HC595 shift regs on LED SPI)
                                1x 10G link
                                1x 1G link
Button:                 Reset
USB ports:              None
Bootloader:             Realtek U-Boot 2011.12
PoE:                    1x HS104PTI for 802.3af/at/bt PoE (driver
                        will follow in a separate patch)

Installing OpenWrt
------------------
1. UART RJ45 requires soldering a connector to the empty footprint (RJ1).
   (Amphenol RJHSEE380 or similar)
2. Connect to UART 38400@8n1, using Cisco Console Rollover cable (RS232)
3. Enter bootloader by pressing esc key during boot
4. Enter password `Hs2021cfgmg`
5. Type `XXXX` to get into U-Boot
6. Increase baudrate: `setenv baudrate 115200`
7. Use serial transfer (Y modem) via minicom:
   `loady 0x84f00000`
   Then send the initramfs image via minicom's Y modem upload.
8. `bootm 0x84f00000`

Now you should be in OpenWrt, and can use sysupgrade to install.

Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
Link: https://github.com/openwrt/openwrt/pull/22310
Signed-off-by: Robert Marko <robimarko@gmail.com>
2026-04-24 12:17:26 +02:00
..
macros.dtsi realtek: dts: drop EXTERNAL_SFP_PHY macro 2026-04-22 16:58:04 +02:00
rtl83xx_d-link_dgs-1210_common.dtsi realtek: Drop unused property on DGS-1210 gpio0 2025-01-28 07:30:32 +01:00
rtl83xx_d-link_dgs-1210_gpio_sfp.dtsi
rtl83xx_d-link_dgs-1210_gpio.dtsi realtek: switch RTL8231 driver for D-Link DGS-1210 2025-01-28 07:30:33 +01:00
rtl83xx_hpe_1920.dtsi realtek: switch HPE 1920 series to NVMEM 2026-02-13 12:06:20 +01:00
rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi
rtl93xx_linksys_lgs3xxc_nand_common.dtsi realtek: dts: convert LGS3xxC to NVMEM 2026-03-14 10:50:47 +01:00
rtl838x.dtsi realtek: dts: relocate/retype switch node 2026-03-21 22:26:02 +01:00
rtl839x_zyxel_gs1920-24hp-common.dtsi realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl839x.dtsi realtek: rtl839x: add port LED peripheral disable 2026-03-30 19:18:56 +02:00
rtl930x.dtsi realtek: dts: fix ethernet-switch node 2026-03-22 11:31:21 +01:00
rtl931x.dtsi realtek: fix pinmux comment in rtl931x.dtsi 2026-04-12 18:23:08 +02:00
rtl8380_d-link_dgs-1210-10mp-f.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_datto_l8.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_engenius_ews2910p-v1.dts realtek: engenius_ews2910p: support multiple hardware versions 2025-05-31 23:19:01 +02:00
rtl8380_engenius_ews2910p-v3.dts realtek: support EnGenius EWS2910P v3 2025-05-31 23:19:01 +02:00
rtl8380_engenius_ews2910p.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_hpe_1920-8g-poe-65w.dts
rtl8380_hpe_1920-8g-poe-180w.dts
rtl8380_hpe_1920-8g.dts
rtl8380_hpe_1920-8g.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_linksys_lgs310c.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_netgear_gigabit.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_netgear_gs108t-v3.dts
rtl8380_netgear_gs110tpp-v1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8380_netgear_gs110tup-v1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8380_netgear_gs308t-v1.dts
rtl8380_netgear_gs310tp-v1.dts realtek: dts: replace ports by ethernet-ports 2026-03-01 14:19:36 +01:00
rtl8380_panasonic_m8eg-pn28080k.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_tplink_sg2xxx.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_tplink_sg2008p-v1.dts realtek: rtl838x: drop SFP pseudo-PHYs and phy-handle 2025-12-09 00:28:41 +01:00
rtl8380_tplink_sg2210p-v3.dts realtek: dts: replace ports by ethernet-ports 2026-03-01 14:19:36 +01:00
rtl8380_zyxel_gs1900_gpio_emulated.dtsi realtek: rtl838x: drop GS1900 MDIO reset GPIO 2026-02-24 21:29:26 +01:00
rtl8380_zyxel_gs1900_gpio.dtsi realtek: rtl838x: drop GS1900 MDIO reset GPIO 2026-02-24 21:29:26 +01:00
rtl8380_zyxel_gs1900-8-a1.dts realtek: rtl838x: rename GS1900 series v1/v2 to A1/B1 2025-09-24 13:41:04 +02:00
rtl8380_zyxel_gs1900-8-b1.dts realtek: rtl838x: rename GS1900 series v1/v2 to A1/B1 2025-09-24 13:41:04 +02:00
rtl8380_zyxel_gs1900-8hp-a1.dts realtek: rtl838x: rename GS1900 series v1/v2 to A1/B1 2025-09-24 13:41:04 +02:00
rtl8380_zyxel_gs1900-8hp-b1.dts realtek: rtl838x: rename GS1900 series v1/v2 to A1/B1 2025-09-24 13:41:04 +02:00
rtl8380_zyxel_gs1900-10hp-a1.dts realtek: dts: replace ports by ethernet-ports 2026-03-01 14:19:36 +01:00
rtl8380_zyxel_gs1900.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_allnet_all-sg8208m.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_apresia_aplgs120gtss.dts realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8382_d-link_dgs-1210-10p.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_d-link_dgs-1210-16.dts realtek: dts: drop EXTERNAL_SFP_PHY macro 2026-04-22 16:58:04 +02:00
rtl8382_d-link_dgs-1210-20.dts realtek: dts: drop EXTERNAL_SFP_PHY macro 2026-04-22 16:58:04 +02:00
rtl8382_d-link_dgs-1210-26.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_d-link_dgs-1210-28_common.dtsi realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8382_d-link_dgs-1210-28.dts
rtl8382_d-link_dgs-1210-28mp-f.dts
rtl8382_d-link_dgs-1210-28p_common.dtsi
rtl8382_d-link_dgs-1210-28p-f.dts
rtl8382_hpe_1920-16g.dts realtek: dts: replace ports by ethernet-ports 2026-03-01 14:19:36 +01:00
rtl8382_hpe_1920-24g-poe-180w.dts
rtl8382_hpe_1920-24g-poe-370w.dts
rtl8382_hpe_1920-24g.dts
rtl8382_hpe_1920-24g.dtsi realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_hpe_1920.dtsi realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8382_inaba_aml2-17gp.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_iodata_bsh-g24mb.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_panasonic_m16eg-pn28160k.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_panasonic_m24eg-pn28240k.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_tplink_t1600g-28ts-v3.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_zyxel_gs1900-16-a1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24-a1.dts realtek: use common dtsi for Zyxel GS1900-24 2026-01-27 01:34:21 +01:00
rtl8382_zyxel_gs1900-24-b1.dts realtek: add Zyxel GS1900-24 B1 device definition 2026-01-27 01:34:21 +01:00
rtl8382_zyxel_gs1900-24.dtsi realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24e-a1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24ep-a1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24hp-a1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24hp-b1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8391_zyxel_gs1920-24hp-v2.dts realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8392_zyxel_gs1920-24hp-v1.dts realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8393_d-link_dgs-1210-52.dts realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8393_edgecore_ecs4100-12ph.dts realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8393_hpe_1920-48g-poe.dts realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8393_hpe_1920-48g.dts realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8393_hpe_1920.dtsi realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8393_netgear_gs750e.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8393_panasonic_m48eg-pn28480k.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8393_tplink_sg2452p-v4.dts realtek: dts: fix TP-Link SG2452P mdio bus 2026-04-12 18:32:35 +02:00
rtl8393_zyxel_gs1900-48-a1.dts realtek: extract shared GS1900-48 dtsi 2026-04-11 19:32:57 +02:00
rtl8393_zyxel_gs1900-48.dtsi realtek: gs1900-48: add RTL8231 resets 2026-04-11 19:36:17 +02:00
rtl8393_zyxel_gs1900-48hp-a1.dts realtek: add Zyxel GS1900-48HP A1 support 2026-04-11 19:35:53 +02:00
rtl9301_d-link_dgs-1250-28x.dts realtek: dts: convert DGS-1250-28X to SWITCH_PORT_SFP() 2026-04-16 11:28:04 +02:00
rtl9301_linksys_lgs328c.dts treewide: strip trailing whitespace 2026-04-08 10:05:53 +02:00
rtl9302_plasmacloud_common.dtsi realtek: Fix pair-order for rtl930x based plasmacloud devices 2026-04-11 12:17:30 +02:00
rtl9302_plasmacloud_mcx3.dts realtek: dts: convert devices to PHY_C45() 2026-04-01 14:12:14 +02:00
rtl9302_plasmacloud_psx8.dts realtek: rtl930x: Add support for Plasma Cloud PSX8 Switch 2025-08-28 21:07:57 +02:00
rtl9302_plasmacloud_psx10.dts realtek: dts: replace ports by ethernet-ports 2026-03-01 14:19:36 +01:00
rtl9302_xikestor_sks8300-12e2t2x.dts realtek: XikeStor SKS8300-12E2T2X: fix GPIO assignments 2026-04-13 11:02:35 +02:00
rtl9302_zyxel_xgs1x10-12-common.dtsi treewide: strip trailing whitespace 2026-04-08 10:05:53 +02:00
rtl9302_zyxel_xgs1010-12-a1.dts realtek: mdio: drop realtek,smi-address property 2026-03-21 22:26:02 +01:00
rtl9302_zyxel_xgs1210-12-a1.dts realtek: mdio: drop realtek,smi-address property 2026-03-21 22:26:02 +01:00
rtl9302_zyxel_xgs1210-12-b1.dts realtek: mdio: drop realtek,smi-address property 2026-03-21 22:26:02 +01:00
rtl9302_zyxel_xgs1210-12-common.dtsi realtek: switch Zyxel XGS1210 to NVMEM 2026-02-15 12:02:38 +01:00
rtl9302_zyxel_xgs1250-12-a1.dts realtek: force in-band autoneg on XGS1250-12 A1 10G PHYs 2026-03-31 12:54:57 +02:00
rtl9302_zyxel_xgs1250-12-b1.dts realtek: mdio: drop realtek,smi-address property 2026-03-21 22:26:02 +01:00
rtl9302_zyxel_xgs1250-12-common.dtsi treewide: strip trailing whitespace 2026-04-08 10:05:53 +02:00
rtl9302_zyxel_xmg1915-10e.dts realtek: add support for Zyxel XMG1915-10E 2026-04-16 14:26:03 +02:00
rtl9303_hasivo_s600wp-5gt-2sx-se.dts realtek: rtl930x: add Hasivo S600WP-5GT-2SX-SE 2026-04-24 12:17:26 +02:00
rtl9303_hasivo_s1100w-8xgt-se.dts realtek: dts: convert devices to PHY_C45() 2026-04-01 14:12:14 +02:00
rtl9303_hasivo_s1100wp-8gt-se.dts realtek: dts: convert devices to PHY_C45() 2026-04-01 14:12:14 +02:00
rtl9303_tplink_tl-st1008f-v2.dts realtek: dts: cleanup of ethernet link speed 2026-03-30 15:00:31 +02:00
rtl9303_vimin_vm-s100-0800ms.dts realtek: dts: cleanup of ethernet link speed 2026-03-30 15:00:31 +02:00
rtl9303_xikestor_sks8300-8t.dts realtek: dts: add PHY_C45() macro 2026-04-01 14:12:14 +02:00
rtl9303_xikestor_sks8300-8x.dts realtek: dts: cleanup of ethernet link speed 2026-03-30 15:00:31 +02:00
rtl9303_xikestor_sks8310-8x.dts realtek: dts: cleanup of ethernet link speed 2026-03-30 15:00:31 +02:00
rtl9311_linksys_lgs352c.dts realtek: pcs: switch SerDes polarity to {rx,tx}-polarity 2026-04-24 10:13:38 +02:00
rtl9312_plasmacloud_common.dtsi realtek: dts: convert devices to PHY_C45() 2026-04-01 14:12:14 +02:00
rtl9312_plasmacloud_esx28.dts realtek: rtl931x: Add support for Plasma Cloud ESX28 Switch 2025-10-04 16:16:22 +02:00
rtl9312_plasmacloud_psx28.dts realtek: rtl931x: psx28: specify POE MCU reset GPIO 2026-04-14 10:38:28 +02:00
rtl9313_xikestor_sks8300-12x-v1.dts realtek: pcs: switch SerDes polarity to {rx,tx}-polarity 2026-04-24 10:13:38 +02:00
rtl9313_zyxel_xs1930-10.dts realtek: pcs: switch SerDes polarity to {rx,tx}-polarity 2026-04-24 10:13:38 +02:00
rtl9313_zyxel_xs1930-12f.dts realtek: pcs: switch SerDes polarity to {rx,tx}-polarity 2026-04-24 10:13:38 +02:00
rtl9313_zyxel_xs1930-12hp.dts realtek: pcs: switch SerDes polarity to {rx,tx}-polarity 2026-04-24 10:13:38 +02:00
rtl9313_zyxel_xs1930.dtsi realtek: add generic support for Zyxel XS1930 lineup 2026-04-20 11:13:06 +02:00