Leonard Anderweit 7449064f64 mediatek: filogic: add support for TP-Link F65 ... Add support for TP-Link Festa F65, an AX3000 ceiling mount WiFi 6 AP. Hardware -------- SOC : MediaTek MT7981B 2x A53 RAM : ESMT M15T4G16256A 512MiB Flash : ESMT F50L1G41LB 128 MiB ETH : 1x 1GbE WiFi : MT7976 Buttons : Reset Leds : Blue status led on top Power : DC 12V 1.2A / PoE Installation ------------ 1. Disassemble the device 2. Solder UART to pins VGRT right of the ethernet port 3. Connect UART console (3.3V) 4. Press Ctrl+b to stop in u-boot shell 5. Use `mtkload` to boot `openwrt-initramfs-kernel.bin` via tftp 6. Flash `openwrt-squashfs-sysupgrade.bin` via sysupgrade Revert to OEM firmware ---------------------- 1. Hold reset button while plugging in power 2. Configure host ethernet to 192.168.0.1/24 3. Go to http://192.168.0.254 4. Upload OEM firmware MAC Addresses ------------- LAN : DC:62:79:xx:xx:28 (printed on label) 2.4GHz: DC:62:79:xx:xx:28 5GHz : DC:62:79:xx:xx:29 Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com> Link: https://github.com/openwrt/openwrt/pull/22138 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2026-05-20 01:05:08 +02:00
..
04_set_netdev_label	mediatek: filogic: support openwrt,netdev-name for renaming interfaces	2024-12-20 18:19:09 +01:00
09_mount_cfg_part	mediatek: filogic: add support for TP-Link F65	2026-05-20 01:05:08 +02:00
10_fix_eth_mac.sh	mediatek: filogic: TP-Link Archer AX80 v1 (EU) support	2025-12-20 17:59:58 +01:00
75_rootfs_prepare	mediatek: filogic: wax220: support factory image	2023-08-22 13:37:27 +02:00