Manually resolve the patch conflicts on new LTS kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22922
Signed-off-by: Nick Hainke <vincent@systemli.org>
They are included in the 6.18 kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22922
Signed-off-by: Nick Hainke <vincent@systemli.org>
Copy patches and kernel configs from 6.18 kernel to restore the
default 6.12 kernel support files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22922
Signed-off-by: Nick Hainke <vincent@systemli.org>
This is a preparation for 6.18 kernel support. It can help us
track the files history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22922
Signed-off-by: Nick Hainke <vincent@systemli.org>
6.14 has introduced a DRM client setup library. Add kmod-drm-client-lib
to support it, and add it as a dependency to DRM modules which depend on it.
Link: https://github.com/openwrt/openwrt/pull/22975
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
This patch adds support for the MikroTik RouterBOARD 960PGS (hEX
PoE/PowerBox Pro) router. The device has a USB 2.0 port and an SFP port for
adding optical fiber connectivity. The ports 2-5 can power other PoE
capable devices with the same voltage as applied to the unit.
Specifications:
- SoC: Qualcomm Atheros QCA9557
- Flash: 16 MB (SPI)
- RAM: 128 MB
- 1x Ethernet SFP: 1000
- 1x Ethernet RJ45: 10/100/1000 port with passive POE in
- 4x Ethernet RJ45: 10/100/1000 ports with 802.3af/at PoE out
- 1x USB 2.0 host port
- 1x reset button
See [1] and [2] for more details.
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Link: https://mikrotik.com/product/RB960PGS [1]
Link: https://mikrotik.com/product/RB960PGS-PB [2]
Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Unset the SWCONFIG symbol and AR8216_PHY which selects SWCONFIG. Add
kmod-switch-ar8xxx, which enables AR8216_PHY, to DEFAULT_PACKAGES for the
subtarget. With this, swconfig driver will be now compiled as a module, as
kmod-switch-ar8xxx selects kmod-swconfig.
Refresh the config-default file for ath79/mikrotik while at it.
This change makes it possible to disable the swconfig driver for MikroTik
RouterBOARD 960PGS (hEX PoE/PowerBox Pro).
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
These two image profiles overwrite DEVICE_NAME making the two image
profiles appear with the same name "ventana" in the "profiles.json"
mixing ramdomly the two profiles.
Use BOARD_NAME instead to keep the two profiles names unique (orginal
DEVICE_NAME) hence generating a coherent "profiles.json".
Since there are image recipes hardconding DEVICE_NAME, change them to use
BOARD_NAME if defined, in order to preserve the previous names used in
those recipes.
Fixes: cbc8bcfbaa ("imx6: image: use vendor_model scheme")
Reported-by: Eric Fahlgren <ericfahlgren@gmail.com>
Signed-off-by: Mario Andrés Pérez <mapb_@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22994
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is required to build the motorcomm dwmac driver which is widely
used on loongson platforms.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/22923
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Motorcomm YT6801 is a PCIe ethernet controller based on DWMAC4 IP. It
integrates an GbE phy, supporting WOL, VLAN tagging and various types
of offloading. It ships an on-chip eFuse for storing various vendor
configuration, including MAC address.
The PM and plat_data functions were slightly modified to build with
current kernel.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/22923
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Stop overriding CCACHE_COMPILERCHECK from rules.mk and rely on
ccache's default, which hashes the compiler binary's mtime and
size.
For a local tree that is enough: the toolchain only changes when
it is rebuilt, and a rebuild updates mtime and size. Users who
want a stricter check can still set CCACHE_COMPILERCHECK in their
environment.
CI does not depend on this export either. The workflow writes a
secondary ccache.conf with
compiler_check=string:<toolchain-commit-sha>
so the cache key is tied to the toolchain source revision. That
is both stricter than the previous "%compiler% -v -c" setting
and portable across runners, where compiler mtimes would not
match after restoring a cache archive.
Link: https://github.com/openwrt/openwrt/pull/22995
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Xiaomi AX6000 has three radios:
- IPQ5018 integrated 2.4 GHz (ath11k AHB, wifi0)
- QCN9024 on PCIe0 (ath11k PCI, QCA8074-class 5 GHz)
- QCA9887 on PCIe1 (ath10k, 5 GHz)
The DTS previously kept pcie1 disabled because the controller
could not bring the link up. The real cause was the PERST GPIO
polarity: the stock device-tree uses GPIO_ACTIVE_HIGH on GPIO18
for the QCA9887 card, while OpenWrt had GPIO_ACTIVE_LOW, leaving
the card held in reset.
With the correct polarity the PCIe1 link trains and the QCA9887
enumerates at 01:00.0. ath10k loads firmware-2.bin, registers
phy0 with mac80211, and provides a functional 5 GHz AP.
Tested on a reworked Xiaomi AX6000 with QCA9887 soldered in.
All three radios enumerate, load firmware and beacon
successfully; scan, association and data traffic confirmed on
each radio.
Signed-off-by: chinawrj <chinawrj@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23047
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some occurrences of regmap_update_bits can be simplified by
using other regmap commands. Use set_bits/clear_bits/assign_bits
for better readability.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23039
Signed-off-by: Robert Marko <robimarko@gmail.com>
All consumers of legacy table commands have been refactored and
use the rtl_table helpers. Drop unused code.
rtl839x_exec_tbl2_cmd() cannot be dropped as it is still used
in the qos code. Keep it for now.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23037
Signed-off-by: Robert Marko <robimarko@gmail.com>
rtldsa_931x_stp_get() and rtl931x_stp_set() use legacy table code.
Replace that with rtl_table_xxx() helpers.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23037
Signed-off-by: Robert Marko <robimarko@gmail.com>
rtldsa_930x_stp_get() and rtl930x_stp_set() use legacy table code.
Replace that with rtl_table_xxx() helpers.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23037
Signed-off-by: Robert Marko <robimarko@gmail.com>
rtldsa_839x_stp_get() and rtl839x_stp_set() use legacy table code.
Replace that with rtl_table_xxx() helpers.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23037
Signed-off-by: Robert Marko <robimarko@gmail.com>
rtldsa_838x_stp_get() and rtl838x_stp_set() use legacy table code.
Replace that with rtl_table_xxx() helpers.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23037
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use regmap in the four target specific hw_init() functions.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23038
Signed-off-by: Robert Marko <robimarko@gmail.com>
Another cleanup of legacy sw() code.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23038
Signed-off-by: Robert Marko <robimarko@gmail.com>
Another two functions that are cleaned from the legacy sw() macros.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23038
Signed-off-by: Robert Marko <robimarko@gmail.com>
The EXTERNAL_SFP_PHY macro is very strange. It has attributes
sfp and media but is not linked to any SFP definition. There
is nothing that the kernel can evaluate better than the classic
PHY_C22 macro.
Remark! For the current D-Link DGS-1210 consumers this macro
should be converted to a PHY_C22_SFP in the future. As of now
there is no hardware to identify the proper gpios and define
and verify the corresponding SFP ports. Add a TODO comment
where needed.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23036
Signed-off-by: Robert Marko <robimarko@gmail.com>
Several EXTERNAL macros have been removed in the past. There is
no need to distinguish if a phy is built into the SoC or is
attached externally.
Do the same for EXTERNAL_SFP_PHY_FULL. This macro denotes a phy
that has a SFP port attached to it. This is usually RTL8214FC
based. To be consistent with other macros name it PHY_C22_SFP.
While we are here make use of the new port/phy notation.
So PHY_C22_SFP(p, n, s) gives
- p: the overall port number
- n: the phy address on the current bus
- s: the sfp identifier
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23036
Signed-off-by: Robert Marko <robimarko@gmail.com>
GCC15 defaults to C23, which does not work here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23042
Signed-off-by: Robert Marko <robimarko@gmail.com>
libcody will fail to build if building using a GCC16 host compiler, so
backport the upstream fix.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
These symbols depend on rustc version and is autodetected and set, so make
sure to filter them out.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Import pending series introducing support for standalone PCS drivers.
This has previously already been used by the airoha target, and is
also the base for the closer-to-upstream patches for MediaTek MT7988
10G SerDes support.
In order to not having to diverge from upstream also backport series
for standardized handling for PHY and PCS SerDes pair polarity.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Linux commit 09371e1349c9 ("lib/crypto: powerpc/md5: Migrate optimized code into library")
removed the PowerPC-specific MD5 implementation (md5-ppc.ko) and
replaced it with an optimized library implementation in lib/crypto.
As a result, CONFIG_CRYPTO_MD5_PPC and the module
arch/powerpc/crypto/md5-ppc.ko no longer exist in kernels >= 6.18.
Link: https://github.com/openwrt/openwrt/pull/22732
Signed-off-by: Nick Hainke <vincent@systemli.org>
Add required 6.18 kernel symbols. Also update kernel config by running
make kernel_oldconfig.
Link: https://github.com/openwrt/openwrt/pull/22732
Signed-off-by: Nick Hainke <vincent@systemli.org>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Link: https://github.com/openwrt/openwrt/pull/22732
Signed-off-by: Nick Hainke <vincent@systemli.org>
Add f2fs support into the kernel, otherwise the overlay f2fs
will not be created.
[ 7.611817] loop0: detected capacity change from 0 to 212992
[ 7.638471] loop0: detected capacity change from 212992 to 206208
[ 7.757259] mount_root: failed to mount -t f2fs /dev/loop0 /tmp/overlay: No such device
Fixes: 1e7950a45d
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Drop symbols removed in Linux 6.18 and add newly introduced symbols.
Also handle symbols that are moved out of or into the generic:
- `#CONFIG_ARCH_SOPHGO is not set` is moved into generic [1]
[1] d3bf8ada02
Signed-off-by: Zhihao Xu <ngc7331@outlook.com>
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Signed-off-by: Zhihao Xu <ngc7331@outlook.com>
