Switch http:// (and redundant ftp://) PKG_SOURCE_URL entries to https://
across tools/ and package/. PKG_HASH alone does not protect against an
attacker tampering with insecure downloads when a maintainer regenerates
the hash via `make ... FIXUP=1`: HTTPS authenticates the upstream so the
captured hash reflects real upstream content.
In-place http -> https (HTTPS reachability verified per host):
- tools/elftosb, tools/lzop, tools/liblzo, tools/mpfr, tools/dosfstools,
tools/libressl, tools/xz
- package/libs/mpfr, package/libs/libmnl, package/libs/libnfnetlink
Replaced with @OPENWRT (HTTPS-only mirror) where the upstream HTTPS host
is dead or has a broken certificate:
- package/libs/popt (ftp.rpm.org cert mismatch)
- package/firmware/ixp4xx-microcode (was http://downloads.openwrt.org)
- package/boot/imx-bootlets (trabant.uid0.hu cert mismatch)
- package/boot/kobs-ng (freescale.com URL is dead, redirects to nxp.com root)
Dropped redundant ftp://ftp.denx.de fallback (https://ftp.denx.de is
already listed):
- package/boot/uboot-tools, tools/mkimage
Signed-off-by: Paul Spooren <mail@aparcar.org>
Release Notes:
- https://github.com/libbpf/bpftool/releases/tag/v7.7.0
Backport upstream commit 9ba0b4add39e ("bpftool: Allow explicitly skip
llvm, libbfd and libcrypto dependencies") to fix a linker error. The
bpftool only needs skeleton generation, not program signing, so pass
SKIP_CRYPTO=1 to drop the libcrypto dependency entirely.
Link: 9ba0b4add3
Link: https://github.com/openwrt/openwrt/pull/22973
Signed-off-by: Nick Hainke <vincent@systemli.org>
ld.bfd is the default/only implementation for now but things may change in future.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21997
Signed-off-by: Nick Hainke <vincent@systemli.org>
Release Notes:
- https://sourceware.org/pipermail/binutils/2026-February/148149.html
OpenWrt changes:
- adjust patch manually:
- 500-Change-default-emulation-for-mips64-linux.patch
- rearrange configure options and variables
- provide variables for both configure and build stages (binutils has more than one ./configure script in source tree)
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21997
Signed-off-by: Nick Hainke <vincent@systemli.org>
Take in account only first two version components to lookup patch directory.
Hovewer, computed "BASE_VERSION" may be overridden (if necessary).
This change should prevent further issues with binutils being unpatched, see commits adad973a9c and 525a1e94b3.
Also drop obsolete "BIN_VERSION" variable (not used anywhere).
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21997
Signed-off-by: Nick Hainke <vincent@systemli.org>
Support for obsolete versions was dropped in upstream commit 72731b445e.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21997
Signed-off-by: Nick Hainke <vincent@systemli.org>
Oldest supported release is 2.44 for upcoming release (25.12).
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21997
Signed-off-by: Nick Hainke <vincent@systemli.org>
The DFI ADN553 is a 3.5" SBC based on Intel Atom Alder Lake-N
processors with three Intel I226V 2.5GbE ports.
Specs:
* CPU: Intel Atom x7425E (4C, 12W) / x7213E (2C, 10W) /
x7211E (2C, 6W)
* RAM: 1x DDR5 SO-DIMM, up to 16GB
* Storage: 1x M.2 M key 2242/2280 (PCIe Gen3 x1/SATA3),
1x SATA 3.0
* Ethernet: 3x 2.5GbE RJ-45 (Intel I226V)
* USB: 4x USB 3.2 (rear), 2x USB 2.0 (internal)
* Expansion: 1x M.2 B key 3052 (USB3/USB2, opt. PCIe x1, SIM),
1x M.2 E key 2230 (USB/PCIe x1, CNVi)
* Display: 1x HDMI, 1x Type-C DP Alt. Mode, 1x LVDS/eDP
* Power: 9-36V DC wide range input
* TPM: dTPM 2.0 (NPCT750AADYX)
* Form factor: 3.5" SBC (146mm x 102mm)
Installation:
1. Write the combined-efi.img to a USB drive:
dd if=combined-efi.img of=/dev/sdX conv=fdatasync
2. Boot the ADN553 from the USB drive via the UEFI boot menu.
3. For permanent installation, write the image to the M.2 or
SATA storage device.
The board uses "Default string" as DMI sys_vendor and product_name
placeholders, so board detection is fixed by filtering these out and
falling through to board_vendor (DFI Inc.) and board_name (ADN553).
The three I226V NICs are pinned to their PCIe paths to ensure
consistent interface ordering matching the physical left-to-right
port layout. eth0 is assigned as WAN and eth1/eth2 as LAN.
Link: https://github.com/openwrt/openwrt/pull/22980
Signed-off-by: Nick Hainke <vincent@systemli.org>
Now that we have a proper driver support for the onboard EMC2301 lets
wire up the fan as a cooling device on the Xiaomi AX9000.
Link: https://github.com/openwrt/openwrt/pull/22942
Signed-off-by: Robert Marko <robimarko@gmail.com>
Now that 6.12 EMC2305 driver is backported to 7.0 code, lets do the same
for 6.18 so they dont diverge.
Link: https://github.com/openwrt/openwrt/pull/22942
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport the Microchip EMC2305 driver changes up to current linux-next.
These are required in order to actually be able to use the driver with
DTS support to drive fans as cooling devices.
Replace the bcm27xx RPi patch with the one from RPi kernel 7.0 that was
already adapted to all of these backports.
Link: https://github.com/openwrt/openwrt/pull/22942
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Drop the old kernel and move over to the latest. We hardly
have any patches so this is a swift change.
Link: https://github.com/openwrt/openwrt/pull/22932
Signed-off-by: Linus Walleij <linusw@kernel.org>
Adapt kernel configuration of the mt7629 subtarget for Linux 6.18.
This was only compile-tested as I don't have the hardward.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The by-now-upstream driver for the built-in 2.5GE PHY of the MediaTek
MT7988 and MT7987 SoC loads firmware at probe time.
Build the driver as a module in order to make sure the driver only
attempts to load the firmware by the time the rootfs with the firmware
file has become available.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Upstream changes to phylink require to make some small changes to our
downstream Airoha AN8855 DSA driver, so it build with Linux 6.18.
The efuse driver is upstream by now and can be dropped.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Delete patches merged upstream and refresh the remaining patches.
Import pending patchset to fix read-out-of-bounds bug in clk driver
while at it, as it makes maintaining the downstream clk driver for
MT7987 easier.
Replace downstream patch for Fidelix FM35X1GA SPI-NAND chip with
upstream commit replacing it (Dosilicon DS35Q1GA is indentical).
Several additional fixes were needed for MT7623N, especially to get
HDMI and the Mali-450 GPU working again...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Our downstream patch for the new SerDes paths on MT7988 wasn't
correctly ported to Linux 6.18 which already got most of the XPCS
support upstream.
Fix (ie. reduce) the patch to make the built-in 2.5G PHY on MT7988 and
MT7987 work again.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Our USXGMII config only covers one single register of which kind there
are actually more. We only set a value for 'CFG_QHSG_TXCFG_MAC_CH0' but
there are additional registers for CH1-CH3. Those refer to the 4
USXGMII 'channels'. While the RTL930x part of the SDK doesn't set them
explicitly, from RTK setup SerDes dumps we can see they are usually
similarly set.
The RTL931x part of the SDK actually writes those register explicitly
during USXGMII. We just haven't implemented that so far. Thus, add this
to the USXGMII config for both RTL93xx.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22939
Signed-off-by: Robert Marko <robimarko@gmail.com>
Since the USXGMII config was made generic before, we can use it now for
the RTL931x setup too. This brings it closer to what the SDK configures
(see _dal_mango_construct_init_usxgmii), fixes some deviations in our
previous settings and makes clearer what is actually done.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22939
Signed-off-by: Robert Marko <robimarko@gmail.com>
The USXGMII config setting specific options currently is only
implemented for RTL930x. Looking at the SDK one can see that RTL931x
shares a lot of these configuration options. Additionally, several dumps
from RTK setups have shown that values which aren't set yet by us for
RTL930x but for RTL931x, also apply for RTL930x. Thus, both can be
merged. Start this by making the current function generic for RTL93xx.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22939
Signed-off-by: Robert Marko <robimarko@gmail.com>
USXGMII autoneg setting is currently hardcoded for RTL930x and not even
handled explicitly for RTL931x. This should be handled via neg_mode from
phylink subsystem too. Thus, move it over to rtpcs_93xx_sds_set_autoneg
as generic implementation for RTL93xx and set it depending on the
provided negotiation mode.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22939
Signed-off-by: Robert Marko <robimarko@gmail.com>
BUFFALO WSR-3000AX4P is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
MT7981B.
Specification:
- SoC : MediaTek MT7981B
- RAM : DDR4 512 MiB (ESMT M16U4G16256A-KJBG)
- Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG)
- WLAN : 2.4/5 GHz 2T2R (MediaTek MT7981B (SoC))
- Ethernet : 4x 10/100/1000 Mbps
- switch : MediaTek MT7531A
- LEDs/Keys (GPIO): 6x/4x
- UART : through-hole on PCB (J1)
- assignment : 3.3V, GND, TX, RX from tri-angle marking
- settings : 115200n8
- Power : 12 VDC, 1.5 A (Max. 14.4 W)
Flash instruction using initramfs image:
1. Prepare a TFTP server with 192.168.11.2
2. Rename initramfs image to "linux.ubi-recovery" and put it to the TFTP
directory
3. Hold the "AOSS" button and power on WSR-3000AX4P, release after 7~
seconds
4. The bootloader automatically downloads the initramfs image and boots
with it
5. After booting, upload a sysupgrade image to the device and perform
sysupgrade with it
6. Wait ~100 seconds to complete flashing
Reverting to stock image:
1. Download a official firmware and decrypt it by buffalo-enc
example:
buffalo-enc -i <official .bin> -o fw.dec -d -O 0xC8 -l
2. Upload the decrypted image to the device
3. Flash the image to the UBI in "ubi_kernel" partition on the device
example:
. /lib/upgrade/common.sh
. /lib/upgrade/nand.sh
CI_UBIPART="ubi_kernel" nand_do_flash_file fw.dec
4. Reboot the device
reboot
Notes:
- WSR-3000AX4P has 2x OS images ("ubi"/"Kernel2"), but the second one
is only for backup and not used for booting.
image handling on the bootloader:
- "ubi" is broken : "Kernel2" --(copy)--> "ubi"
- "Kernel2" is broken : "ubi" --(copy)--> "Kernel2"
- "ubi" != "Kernel2" :
- boot_select=0: "ubi" --(copy)--> "Kernel2"
- boot_select=1: "Kernel2" --(copy)--> "ubi", set boot_select to '0'
MAC Addresses:
LAN : EC:5A:31:xx:xx:50 (board_data, "mac" (text))
WAN : EC:5A:31:xx:xx:50
2.4GHz: EC:5A:31:xx:xx:52
5GHz : EC:5A:31:xx:xx:59
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22587
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Enable ascii-env NVMEM driver (CONFIG_NVMEM_LAYOUT_ASCII_ENV) on
mediatek/filogic subtarget, to handle ascii-based MAC addresses
in key-value format stored to the mtd partition.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22587
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add support for BUFFALO WSR-3000AX4P, to allow updating environment
variables of U-Boot on that device.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22587
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
