latch_enabled should be false when unlocking. it's set to true when
locking. Probably copy/paste bug.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23150
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Makes it a lot clearer what phy1tpt is, especially since it differs
between ath10k and ath9k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21004
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
It appears 683-of_net-add-mac-address-to-of-tree.patch relies on the
mac-address nvmem property being present. wmac itself doesn't need it as
it takes it from the eeprom but label-mac-device needs it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21035
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is already done in userspace. In addition, it's hard to do in nvmem
as they rely on non standard locations.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21035
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a ceiling mount AP with only one ethernet port. eth0 is
specified in the dts but not eth1.
Fixes: 935a63c ("ath79: add support for COMFAST CF-E380AC v2")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21035
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
A script was ran that checks the label-mac-device node to see if it has
nvmem definitions as label-mac-device requires nvmem.
This is mostly a change to make the script happy. No indended functional
difference.
Add a change to qca9533_yuncore_cpe830.dts adding an nvmem definition to
wmac. Seems to have been some kind of oversight where it's specified in
nvmem but not used. label-mac-device needs an NVMEM definition.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22907
Signed-off-by: Robert Marko <robimarko@gmail.com>
On 25.12.0 the device has not enough free blocks to initialize overlay.
Move the device to tiny target and consume backup with storage
partitions, which were previously unused. This operation will reclaim
~800 KiB of flash memory. OEM used storage partition for configuration,
while backup was used to store copy of U-Boot environment and copy of
calibration data.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Partially revert 5e3a602def. Unfortunately the ethaddr value in U-Boot
environment is enclosed in double quotes which makes it longer than
ETH_ALEN, thus nvmem returns EINVAL. Switch back to handling the MAC
addresses in user space.
Fixes: 5e3a602def ("ath79: sitecom,wlrx100: use nvmem")
Reviewed-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
The ath9k driver creates an ath9k LED by default. Instead of having a
non functional LED, configure it properly and remove the extra as it's
not needed.
It's also a bit funny matching against phy0 and phy1 when both differ
between ath9k and ath10k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
Normally WMAC handles 2.4ghz on ath79 devices. Some older units though
handle 5ghz on WMAC and 2.4ghz on pcie. This can be seen by the
frequemcy limits placed on each interface.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
The ath9k driver creates an ath9k LED by default. Instead of having a
non functional LED, configure it properly and remove the extra as it's
not needed.
It's also a bit funny matching against phy0 and phy1 when both differ
between ath9k and ath10k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
The ath9k driver creates an ath9k LED by default. Instead of having a
non functional LED, configure it properly and remove the extra as it's
not needed.
It's also a bit funny matching against phy0 and phy1 when both differ
between ath9k and ath10k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
In ath9k, 1 is specified as the default GPIO unless matched to a
specific device. None of these match to anything and use 1 anyway.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
Makes it a lot clearer what phy1tpt is, especially since it differs
between ath10k and ath9k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
Now that we have a board file, add calibration variant for TP-Link
EAP225-Wall v2 and add ipq-wifi package for it.
Tested-by: Alexander <52272120+alexxela1337@users.noreply.github.com>
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23216
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch adds support for the MikroTik RouterBOARD 960PGS (hEX
PoE/PowerBox Pro) router. The device has a USB 2.0 port and an SFP port for
adding optical fiber connectivity. The ports 2-5 can power other PoE
capable devices with the same voltage as applied to the unit.
Specifications:
- SoC: Qualcomm Atheros QCA9557
- Flash: 16 MB (SPI)
- RAM: 128 MB
- 1x Ethernet SFP: 1000
- 1x Ethernet RJ45: 10/100/1000 port with passive POE in
- 4x Ethernet RJ45: 10/100/1000 ports with 802.3af/at PoE out
- 1x USB 2.0 host port
- 1x reset button
See [1] and [2] for more details.
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Link: https://mikrotik.com/product/RB960PGS [1]
Link: https://mikrotik.com/product/RB960PGS-PB [2]
Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Unset the SWCONFIG symbol and AR8216_PHY which selects SWCONFIG. Add
kmod-switch-ar8xxx, which enables AR8216_PHY, to DEFAULT_PACKAGES for the
subtarget. With this, swconfig driver will be now compiled as a module, as
kmod-switch-ar8xxx selects kmod-swconfig.
Refresh the config-default file for ath79/mikrotik while at it.
This change makes it possible to disable the swconfig driver for MikroTik
RouterBOARD 960PGS (hEX PoE/PowerBox Pro).
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Import pending series introducing support for standalone PCS drivers.
This has previously already been used by the airoha target, and is
also the base for the closer-to-upstream patches for MediaTek MT7988
10G SerDes support.
In order to not having to diverge from upstream also backport series
for standardized handling for PHY and PCS SerDes pair polarity.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This is apparently a redundant u-boot config split between cfg1 and
cfg2. The size is also 0x10000 instead of the full amount.
This is needed in order to fix ethernet probing.
Fixes: 3faa3a04bb ("ath79: enterasys,ws-ap3805i: use nvmem")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22882
Signed-off-by: Robert Marko <robimarko@gmail.com>
The 6.18 testing kernel for ath79 target is ready now.
Tested on ath79/nand:Netgear R6100
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22771
Signed-off-by: Nick Hainke <vincent@systemli.org>
CONFIG_PAGE_BLOCK_MAX_ORDER was set to 10 as the page size is 4k.
All other kernel symbols are automatically refreshed by
`make kernel_oldconfig CONFIG_TARGET=target` and
`make kernel_oldconfig CONFIG_TARGET=subtarget`.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22771
Signed-off-by: Nick Hainke <vincent@systemli.org>
Copy patches and kernel configs from 6.18 kernel to restore the
default 6.12 kernel support files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22771
Signed-off-by: Nick Hainke <vincent@systemli.org>
This is a preparation for 6.18 kernel support. It can help us
track the files history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22771
Signed-off-by: Nick Hainke <vincent@systemli.org>
The bootloader on this device is old and supports no lzma. So use
lzma-loader to work around this and get the size smaller so that an
image can actuallly be created and flashed. Because of these size
problems, the last usable version of OpenWrt was 23.05.
This UIMAGE_MAGIC seems to be used by other Netgear devices. Add to
avoid
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000000: 0x2705 instead
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22769
Signed-off-by: Robert Marko <robimarko@gmail.com>
Stocks args have
console=ttyS0,9600
rootfstype=squashfs
root=31:03
init=/sbin/init
mtdparts=ar7100-nor0:256k(u-boot),64k(u-boot-env),
1024k(vmlinux.gz.uImage),6208k(rootfs),512k(var),
64k(manufacturing-data),64k(ART)
rootfstype=squashfs,jffs2
which is wrong and interferes with OpenWrt. Keep the non default console
parameter to have console working properly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22769
Signed-off-by: Robert Marko <robimarko@gmail.com>
For running, have it be the green LED as in stock firmware.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22769
Signed-off-by: Robert Marko <robimarko@gmail.com>
Using awk and cut to simulate -n is pointless.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22806
Signed-off-by: Robert Marko <robimarko@gmail.com>
This symbol is selected by CONFIG_BPF, which was already enabled
on generic config-6.12.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22730
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
<>, <> is the preferred way to specify multiple entries.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22736
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems the bootloader does not use 115200, which the dtsi file
specifies. Remove it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22735
Signed-off-by: Robert Marko <robimarko@gmail.com>
Needed so that the WiFi interfaces come up properly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22735
Signed-off-by: Robert Marko <robimarko@gmail.com>
Users report pll-data is needed for gigabit speeds.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22735
Signed-off-by: Robert Marko <robimarko@gmail.com>
For whatever reason, in the transition from ar71xx to ath79, the second
interface ends up as phy0.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22705
Signed-off-by: Robert Marko <robimarko@gmail.com>
